1, To adjust the height of the tape
sealing machine table, the adjustment method is to loosen the tripod
inside the tripod locking screws, according to the required height, pull
out the tripod adjustment frame, and then tighten the tripod locking
screws.
2. The carton to be sealed is placed in the body of the sealing machine.
The length of the carton to be sealed is about one-third of the length
of the box. According to the size of the box, shake the vertical handle
and move the lifting frame to adjust the height of the upper movement.
So that the lower movement touches the box.
3. Shake the handle horizontally and horizontally to adjust the position
of the conveyor belt so that the conveyor belts are clamped together.
Then remove the boxes. Then shake the handles to allow the conveyor
belts to rest again. After the adjustment is completed, continuous
operation can be performed.
4, the tape tray according to the instructions were installed on the
carton sealing machine, the tape seat of the next movement, so that the
plastic facing the direction of the box, and then the adhesive surface
around the guide belt idler, rubber surface bypass one-way The copper
wheel, between the front and rear lines and the rubber wheel, keeps the
glue facing the direction of the box.
5, in order to close the lid, adjust the guide wheel position. Loosen
the hand wheel and push the wheel guide so that the guide wheel is
tightly attached to both sides of the box and then the hand wheel is
locked.
6, the last step of the use of tape sealing machine, press the power switch, pushed into the box, the box along with the conveyor belt forward, through the interlocking sealing mechanism, automatically complete the upper and lower carton sealing and cutting action.
